Applying Device Plates
Video
Step One
Thoroughly clean the phone or case mounting surface with the included degreasing wipes.
Step Two
After the degreasing wipe residue has dried, thoroughly clean the surface again with the included alcohol prep pad.
Step Three
Once thoroughly cleaned, allow the surface to dry for at least 60 seconds. There should be no visible cleaning product left.
Step Four
Peel the protective backing off of the adhesive side of the Device Plate. Be careful to not touch the exposed adhesive.
Step Five
Place the Device Plate on the cleaned mounting surface. Press disc down firmly for at least 60 seconds to ensure strongest bond.
Step Six
Allow Device Plate adhesive to set for at least 24 hours (48 hours in warmer temperatures) before any use. Do not attach to any mount during this time.
